Cabling
Military-grade Ethernet cable
PN: CAB-Z-02
Military grade ETH cable. Allows connect the modem module to other network devices.
Length: 5 m
Dedicated to SatPack and Phoenix series terminals.
Military-grade USB cable
PN: CAB-Z-01
Military-grade USB 3.0 cable. It allows connect the modem module to other devices using the USB interface.
Lenght: 1.8 m
Dedicated to SatPack and Phoenix series terminals.
AC IN power cable
PN: CAB-Z-04
AC power cable with European type F plug, military-grade design. Allows to connect the power supply to mains.
Length: 3 m
Dedicated to the ULTRA power supply for SatPack and Phoenix series devices and power supplies for FlyAway class terminals.
DC IN power cable
PN: CAB-Z-11
DC power cable with banana plugs and clamps for connecting the battery, military-grade design. Allows to connect the power supply to a DC source.
Length: 3 m
Dedicated to the ULTRA power supply for SatPack and Phoenix series devices.
Car cigarette lighter socket adapter
PN: ADAP_003
Adapter for connecting DC IN cables to a car cigarette lighter socket.
Length: not applicable
Dedicated to the ULTRA power supply for SatPack and Phoenix series devices and TacNet400(X) series tactical cases.
DC OUT power cable
PN: CAB-Z-13
DC power cable to connect the terminal to the power supply.
Length: 1.5 m
Dedicated to the ULTRA power supply for SatPack and Phoenix series devices and power supplies for FlyAway class terminals.
DC OUT Y power cable
PN: CAB-Z-14
DC power cable to connect the No-IDU modem module and ACU antenna controller to the power supply.
Length: 1.5 m
Dedicated to FlyAway class terminal power supplies.
BAT power cable with charging function 1xBB-2590
PN: CAB-Z-06
Cable for connecting 1x BB-2590 battery with charging function, military-grade design. It allows you to connect the power supply to a backup power source, extending it with the UPS mode function.
Length: 1 m
Dedicated to the ULTRA power supply for SatPack and Phoenix series devices.
BAT power cable with charging function 3xBB-2590
PN: CAB-Z-09
Cable for connecting 3x BB-2590 batteries with charging function, military-grade design. It allows you to connect the power supply to a backup power source, extending it with the UPS mode function.
Length: 1 m
Dedicated to the ULTRA power supply for SatPack and Phoenix series devices.
BAT power cable without charging function 5x BB-2590
PN: CAB-Z-15
Cable for connecting 5x BB-2590 batteries without charging function, military-grade version. It allows you to connect the power supply to a backup power source, extending it with the semi-UPS mode function.
Length: 3 m
Dedicated to the ULTRA power supply for SatPack and Phoenix series devices.
L-Band cable drum 70 m
PN: CAB-DR-01 / CAB-DT-01
Cable reel with coaxial cable, outdoor, military-grade design. Flexible cable, LMR-400, resistant to environmental conditions. It allows you to make a connection between the IDU and ODU part of the system.
Length: 70 m
Dedicated to FlyAway class antenna systems.
Please provide the selected Rx and/or Tx path in the "Comment" field of the form below.
70 m long Ethernet cable reel
PN: CAB-DS-02
Cable drum with twisted-pair Ethernet, outdoor, military-grade design. Flexible cable, resistant to environmental conditions. It allows you to make a connection between the IDU and ODU part of the system.
Length: 70 m
Dedicated to FlyAway class antenna systems.
Power cable reel 70 m
PN: CAB-DP-01
Outdoor, military-grade power cable drum. Flexible cable, resistant to environmental conditions. It allows you to make a connection between the IDU and ODU part of the system, or connect an antenna system to a remote AC power source.
Length: 70 m
Dedicated to power supplies for SatPack and Phoenix series devices and power supplies for FlyAway class terminals.
Fiber optic cable drum 150 m
Fiber optic drum, single-mode, 4x LC/APC, outdoor, military-grade design. Flexible cable, resistant to environmental conditions. It allows you to make a connection between the IDU and ODU part of the system.
Length: 150 m
Dedicated to FlyAway class antenna systems.
“Short” drum cable – ACU L-Band
PN: CAB-OR-01 / CAB-OT-01
Outdoor coaxial cable. Flexible cable, LMR-195/200, resistant to environmental conditions. Enables a connection between the cable drum and the ACU antenna controller installed on the antenna in the ODU part of the system.
Length: 3 m
Dedicated to FlyAway class antenna systems.
Please provide the selected Rx and/or Tx path in the "Comment" field of the form below.
“Short” drum cable – ACU Ethernet
PN: CAB-OS-08
Outdoor twisted pair Ethernet cable. Flexible cable, resistant to environmental conditions. Enables a connection between the cable drum and the ACU antenna controller installed on the antenna in the ODU part of the system.
Length: 3 m
Dedicated to FlyAway class antenna systems.
"Short" drum cable - ACU fiber optic
Fiber optic cable, single-mode, 4x LC/APC, outdoor, military-grade design. Flexible cable, resistant to environmental conditions. Enables a connection between the cable drum and the ACU antenna controller installed on the antenna in the ODU part of the system.
Length: 3 m
Dedicated to FlyAway class antenna systems.
ACU antenna cable – RFT/LNB L-Band
PN: CAB-OR-03 / CAB-OT-02
Outdoor coaxial cable. Flexible cable, LMR-195/200, resistant to environmental conditions. It enables the connection between the RFT transmitter or LNB receiver installed on the antenna and the ACU antenna controller.
Length: 3 m
Dedicated to FlyAway class antenna systems.
Please provide the selected Rx and/or Tx path in the "Comment" field of the form below.
ACU – FO/No-IDU Ethernet antenna cable, military-grade design
Military-grade version of ETH cable. Enables an Ethernet connection between the ACU antenna controller installed on the antenna and the No-IDU modem module or a set of optical converters installed directly on the ACU.
Length: 30 cm
Dedicated to FlyAway class antenna systems.
ACU – FO/No-IDU M&C antenna cable, military-grade design
Military-grade signal cable. Enables the creation of a control connection (M&C) between the ACU antenna controller installed on the antenna and the No-IDU modem module or a set of optical converters installed directly on the ACU.
Length: 30 cm
Dedicated to FlyAway class antenna systems.
ACU – RFT Advantech M&C antenna cable, military-grade design
PN: CAB-OS-02
Military-grade signal cable. Enables a control connection (M&C) between the ACU antenna controller installed on the antenna and the Advantech RFT transmitter, with or without the Relay option.
Length: 2 m
Dedicated to FlyAway class antenna systems.
ACU antenna cable - POLARIZATION, military-grade design
Military-grade signal cable. Enables the creation of a control and power connection between the ACU antenna controller installed on the antenna and the polarization engine that is part of the equipment of the Ku-band RF part.
Length: 3 m
Dedicated to FlyAway class antenna systems.
ACU – FO/No-IDU L-Band antenna cable
Outdoor coaxial cable. Flexible cable, LMR-195/200, resistant to environmental conditions. Enables L-Band signal connection between the ACU antenna controller installed on the antenna and the No-IDU modem module or a set of optical converters installed directly on the ACU.
Length: 30 cm
Dedicated to FlyAway class antenna systems.
Please provide the selected Rx and/or Tx path in the "Comment" field of the form below.
ACU – FO 10 MHz antenna cable
Outdoor coaxial cable. Flexible cable, resistant to environmental conditions. Enables the connection of a 10 MHz reference signal between the ACU antenna controller installed on the antenna and the No-IDU modem module or a set of optical converters installed directly on the ACU.
Length: 30 cm
Dedicated to FlyAway class antenna systems.
TacNet400(X) Series Cable – DC OUT for PacStar 400-Series
PN: TN400-01-01
Power cable between the TacNet400(X) Series Tactical Case and the single PacStar 400-Series Module, providing power supply voltage to the network modules.
Length: 50 cm
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) series – DC OUT for PacStar 400-Series LONG
PN: TN400-02-01
Power cable between the TacNet400(X) Series tactical Case and a single PacStar 400-Series module, providing power supply voltage to the network modules.
Length: 57 cm
Dedicated to use with TacNet400(X) series cases.
TacNet400(X) Series Cable – DC OUT for KG250X/XS
PN: TN400-01-05
Power cable between the TacNet400(X) Series Tactical Case and a single KG250X/XS Encryption Module, providing power to the Encryption Module.
Length: 50 cm
Dedicated to use with TacNet400(X) series cases.
TacNet400(X) Series Cable – DC OUT for Cradlepoint IBR 600/900
PN: TN400-01-04
Power cable between the TacNet400(X) Series Tactical Case and a single Cradlepoint IBR 600/900 Access Point, providing power to the access point.
Length: 50 cm
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) series – DC OUT for Peplink BR2 Pro
PN: TN400-01-08
Power cable between the TacNet400(X) Series Tactical Case and a single Peplink BR2 Pro Access Point, providing power supply voltage to the AP.
Length: 50 cm
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) Series – DC OUT between PacStar 400-Series and KG250X/XS
PN: TN400-01-03
Power cable between a single PacStar 400-Series module and the KG250X/XS encryption module providing power to the encryption module.
Length: 50 cm
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) Series – DC OUT between PacStar 400-Series and Cradlepoint IBR 600/900
PN: TN400-01-02
Power cable between a single PacStar 400-Series module and a Cradlepoint IBR 600/900 access point, providing power to the access point.
Length: 50 cm
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) series – DC IN power supply with 2xBB2590
PN: TN400-01-06
Cable providing power to the TacNet400(X) case set from 2x BB-2590 batteries, non-rechargeable, with hot-swap function.
Length: 50 cm
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) series – DC IN power supply with 3xBB2590
PN: TN400-01-07
Cable providing power to the TacNe 400(X) case set from 3x BB-2590 batteries, non-recharging, with hot-swap function.
Length: 50 cm
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) series – DC IN powered from car cigarette lighter socket or accumulator
PN: TN400-01-09
A cable terminated with banana plugs and clamps for connecting the accumulator, providing power to the TacNet400(X) case set from a DC source or car charger socket.
Length: 3 m
Dedicated to use with TacNet400(X) series cases.
If you want to power the device from the car cigarette lighter socket, it is necessary to additionally purchase the article PN: ADAP_003.
Cable for the TacNet400(X) series - AC IN in the EU version
Cable providing power to the TacNet400(X) case set from the AC network, terminated with a European type F plug.
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) series - AC IN in GB version
Cable providing power to the TacNet400(X) case set from the AC network, terminated with a G-type plug.
Dedicated to use with TacNet400(X) series cases.
Cable for TacNet400(X) series – AC IN, US version
A cable that provides power to the TacNet400(X) case kit from AC mains, terminated with a B-type plug.
Dedicated to use with TacNet400(X) series cases.